MECHANICAL SWEEPER Truck-Mounted Road Sweeper

Side view of the Maniar Sweep X mechanical road sweeper with collection hopper body, rear brush and Tata truck cab
Rear three-quarter view of the Maniar Sweep X mechanical road sweeper with conveyor body, side broom and rear brush on a white Tata truck chassis
Front three-quarter view of the Maniar Sweep X mechanical road sweeper on a white Tata truck chassis
Rear side three-quarter view of the Maniar Sweep X mechanical road sweeper showing the conveyor body, side broom and rear brush
Front side three-quarter view of the Maniar mechanical road sweeper on a white Tata truck chassis with blue wave graphics on the body

MECHANICAL SWEEPER

The Maniar Sweep X is a truck-mounted mechanical conveyor road sweeper for cleaning streets, industrial areas and other paved surfaces. A main broom at the centre of the machine and side brooms collect dust and debris into a 3.2 cum hopper, which a scissor lift dumps at a height of at least 2900 mm, directly into tippers.

The mechanical sweeper has no limitations and collects leaves, paper, metal cans and even gravel. It sweeps on uneven roads and in wet conditions, with a sweeping width of 1470 mm (2800 mm with side brooms), a 750 litre water system with spray nozzles at each broom, and three cameras with an in-cab screen. The brooms are hydraulically driven, the machine runs on an auxiliary 65 HP engine, and it is mounted on a chassis of minimum 11 tonnes GVW. See all street sweepers or use the enquiry form below for a quotation.

Technical Specification

TECHNICAL SPECIFICATION
MECHANICAL CONVEYOR TYPE ROAD SWEEPER
Vehicle Minimum 11 Tonnes GVW  
Features   The machine is able to sweep on uneven road condition
    The machine is mechanical conveyor type hence eliminating the filter bags system in case of vacuum sweeper.
    The machine is capable to sweep in wet condition.
    High rise scissor mechanism can dump debris into the tippers directly.
    The machine have precise setting for side broom with respect to road condition.
    Sweeping width should be minimum 2700mm.
    The machine is capable to lift heavy deposited sand/dust on ground or at corner of footpath/divider.
    The machine have all controls in cabin and lever controls at rear for maintenance purpose.
Sweeper Machine Specification
  Sweeping Width 1470mm
  Sweeping Width with Side Broom 2800mm
Main broom Diameter x length 890mmx 1470mm
  Lift control Hydraulic in cabin
  Drive Hydraulic motor
  Digging pressure Chains with springs
  Mounting Trailing arms
  Speed control Variable, hydraulically adjusted
Side broom Diameter 915mm min
  Drive Hydraulic motor/direct drive
  Mounting Free floating/sideways oscillation
  Digging pressure Hydraulic , in-cab adjustment
Conveyor Type Squeegee with 7 rubber flights
  Width 1470mm
  Material Steel chain on urethane sprocket
  Drive Hydraulic drive/direct drive
  Speed control Variable, hydraulic adjusted
Debris hopper Capacity volumetric 3.2 cum
  Material 3mm thk MS
  Lift capacity 3000 kg
  Dump angle 45-50 degree
  Lifting method Scissor with single hydraulic cylinder
  Max. dump height Min2900 mm
Auxiliary engine sweeper Make Mahindra/ kirloskar or equivalent
  Type Inline 4 cylinder
  Horse power 65 HP
  Air filter Dry type, heavy duty with pre cleaner
Hydraulic system Pump Variable displacement open circuit piston pump with load sense
  Tank 180 liters min.
  Tank fittings Suction filter, return line filter, oil level gauge etc
  Cooler Externally mounted/ electric fan
  Controls In-cab, electric with manual override
  Safety Low hydraulic level shut down
Water system Capacity 750 liters
  Tank construction Polyethylene, removable
  Pump 11.0 LPM flow rate
  Spray nozzle 3 per each broom
  Filter Y Type Suction Filter
  Lights Working light per each broom
  Camera 3 Nos. Camera on both side Broom and Rear with LED Screen fitted in Cabin