Get Your Free Quote…!
The VSM-300 is a medium-duty vacuum sweeper with a 3 cum hopper, mounted on a medium-duty truck chassis for routine municipal street cleaning routes.
It is manufactured by Maniar & Co. in Ahmedabad, India. See all vacuum sweepers, or use the form below to get the full specification by email.
One main broom (500mm dia) and two side brooms (500mm dia) — all hydraulically rotated and hydraulically raised and lowered — sweep gravel, leaves, litter, and sand into the path of the suction hose. A high-efficiency, dynamically balanced blower draws that debris into a hydraulically operated hopper (3 cum, 3mm thk MS). The blower and hydraulic system are normally powered by the VSM-300's own auxiliary diesel engine; a PTO-driven alternative, taking power directly from the vehicle instead, is also available — similar to how the compact 1.4 cum model runs. Dust pulled in with the debris passes through 15 pleated filters (64 sq m filtration area) with an automatic pulse-jet cleaning cycle before the air is released. A 200-litre plastic water tank feeds a high-pressure water pump to brass/SS spray nozzles on the side brushes, damping dust at the point of pickup. All controls, including broom up/down and rotation, hopper up/down, and engine/PTO on-off, are provided in the driver's cabin.
Mounted on a medium-duty truck chassis, the VSM-300 steps up from the compact VSM-140 with a larger 3 cum hopper and a wider filtration bank suited to fuller municipal routes. The onboard water spray system helps keep dust down on drier, dustier roads that the smallest model isn't built to handle for long stretches. Because the auxiliary diesel engine can be swapped for an optional PTO-driven setup, fleets standardising on PTO-driven equipment can specify the VSM-300 to match.
The VSM-300 has a 3 cum hopper, a sweeping width of 1600 mm (2300 mm with the side broom engaged) and a sweeping speed of 3 to 10 km/h. It is built on a Tata 712 BS VI chassis. For the complete specification, request it below and we will email it to you with photographs.
Enter your details and we will email you the complete specification of this model with photographs. Our team will also get your request and can contact you.
1600mm without the side broom, extending to 2300mm with the side broom engaged.
It normally runs off its own auxiliary diesel engine, but a PTO-driven alternative, taking power directly from the vehicle, is also available as an option.
Yes. A 200-litre plastic tank feeds a high-pressure pump to brass/SS spray nozzles on the side brushes for dust suppression.
A medium-duty truck chassis, sized between the compact VSM-140 and the larger VSM-500 and VSM-600 models.
