Get Your Free Quote…!
The Maniar SS-20000 is the largest model in the Super Sucker range: a truck-mounted high flow suction machine with a 20000 litre tank and a 6400 cum/hr rotary lobe vacuum pump, the highest suction flow Maniar offers, built on a 28 ton GVW BS VI chassis. As a sewer suction machine and vacuum tanker, it cleans sewer lines, cesspits and cesspools by siphoning out mud, slurry, sludge and other material. An optional jetting facility lets it jet and vacuum a line in one pass. It suits major municipal infrastructure and large industrial sites that need the highest suction flow in the range.
It is manufactured by Maniar & Co. in Ahmedabad, India. See all super sucker machines, or use the form below to get the full specification by email.
A Jurop (or equivalent) rotary lobe vacuum pump, driven through a full torque split shaft PTO fitted between the vehicle gearbox and differential, creates a vacuum of up to 93% in the sludge tank. This draws the effluent in through a 100 mm x 15 m heavy duty PVC suction hose and a 100 mm ball valve. Two ball-float shut-offs inside the tank, a stainless steel mesh suction strainer and an exhaust silencer protect the pump from overflow and solids and keep the noise down.
Solid silt that has settled in the line is stirred by high velocity air and converted into a liquid or semi-liquid form that can be sucked up. When the tank is full, a blow-back system pressurises it and discharges only the water, so the truck carries away sludge and not the water that came with it. At the disposal point, a front-mounted hydraulic cylinder tips the tank and the rear door opens hydraulically against a heavy duty rubber gasket.
The SS-20000 can be fitted with a jetting pump that runs on its own auxiliary engine, independent of the vacuum pump drive. The truck can therefore jet a line and vacuum out what it loosens in the same pass, instead of doing the two jobs separately. The pump is sized to the task:
The jetting hose is carried on a boom that rotates 90 degrees to either side of the vehicle, so it can be positioned around whatever is in the way at the site.
Two nozzles are supplied as standard whenever the jetting facility is fitted. The conical head nozzle (front and rear holes) is the general-purpose choice: it balances forward penetration with enough rear thrust to pull the hose along the line. The round head nozzle (front and rear holes) trades some penetration for a wider spray, which is better for flushing loosened debris back out.
Penetrators, root cutters, descaling nozzles and rotating nozzles can also be supplied for more specialised jobs.
The SS-20000 carries 20000 litres in a 6 mm mild steel tank on a 28 ton GVW BS VI chassis. Its rotary lobe vacuum pump delivers 6400 cum/hr at up to 93% vacuum through a 100 mm x 15 m suction hose. The tank is tipped and the rear door opened hydraulically. For the complete specification, including pump, hydraulic system, accessories and the jetting option, request it below and we will email it to you with photographs.
Enter your details and we will email you the complete specification of this model with photographs. Our team will also get your request and can contact you.
The SS-20000 is a truck-mounted high flow suction machine for cleaning sewer lines, cesspits and cesspools. It siphons out mud, slurry, sludge and other material into a 20000 litre tank.
The SS-20000 has a Jurop or equivalent rotary lobe vacuum pump with a flow of 6400 cum/hr and a maximum vacuum of 93%. The pump is air cooled by air injection.
A 100 mm diameter heavy duty PVC suction hose, 15 metres long, with 100 mm ball valves on the suction and discharge sides.
The 20000 litre cylindrical tank is made of 6 mm mild steel (IS:2062) with internal baffles and is mounted on a 28 ton GVW BS VI chassis. The tank is tipped by a front-mounted hydraulic cylinder and the rear door opens hydraulically.
Yes, as an option. The jetting pump runs on its own auxiliary engine, so the SS-20000 can jet and vacuum in the same pass. A small pump (from 70 LPM) is for washdown and a large pump (up to 330 LPM) is for clearing large-diameter underground drainage pipe. The jetting hose is carried on a boom that rotates 90 degrees to either side.
Yes. A small crane is included for lifting manhole lids.
The SS-20000 has a 20000 litre tank and a 6400 cum/hr pump on a 28 ton GVW chassis. The SS-15000 has a 15000 litre tank and a 4150 cum/hr pump on a 28 ton GVW chassis, and the SS-8000 has an 8000 litre tank and a 2500 cum/hr pump on a 16 ton GVW chassis. All three use a 100 mm x 15 m suction hose.
